Gator Grip - Frequently Asked Questions - FAQ

FAQ

Frequently Asked Questions:

·     Why don't the rods break?  

The rods transfer the turning force from the fastener to the socket walls. The rods are compressed and are not subject to bending forces.

·     Will it remove locking lug nuts?

Depending on the specific design, the answer is probably yes.   Gator-Grip®  grips around the edges and not in the center.  If the fastener edge is anything other than perfectly round then Gator-Grip® should work.

·     Can I use Gator-Grip® to change spark plugs? 

No. The rods do not retract far enough. The only way to make the rods retract further would be to lengthen the entire socket. The current design offers the greatest functionality for the most applications.

·     Can Gator-Grip® drive screws?

The Gator-Grip® socket grips along the outer edges of a fastener. The rods cannot reach into the interior of a screw head

·     What does the power adapter do? 

The power adapter allows the Gator-Grip® to be connected to a cordless drill/driver.  It's a great application.

·     I've seen a low cost socket with rods that looks like a Gator-Grip®. Why is Gator-Grip® better?

The success of Gator-Grip® has inspired some companies to violate patents and offer cheap, low quality copies.  Only Gator-Grip® features:

·     High quality alloy steel parts: Copies use cheap soft steel parts that break the first time you use them.  Gator-Grip® uses hardened alloy steel parts that last a lifetime.

·     More rods: Gator-Grip® uses 54 rods.  Copies use half as many.  More rods means that Gator-Grip® fits more fasteners and fits them faster and better.

·     Round rods: Copies use square or hexagonal rods with sharp edges.  Sharp edges gouge fasteners and are prone to fracture. Gator-Grip® uses round rods that are gentle on fasteners and resistant to fracture.

·     Scalloped socket walls: The scallops perform two functions: 1) they help move torque to the walls of the socket and 2) as a fastener is turned rods ride up the scallop walls and move inward  to clamp down on the fastener.

·     Higher torque: Better steel and more rods means Gator-Grip® can deliver 4X to 5X the turning force.  Copies fail at 30-40 ft. lbs. Gator-Grip® has been tested to over 150 ft. lbs. (it exceeds 200 ft. lbs. in lab tests) - equal to the torque of conventional sockets.

·      Resistance to solvents:  Some knockoffs fall apart when cleaned in parts cleaner, paint thinner or gasoline - the springs are held in place with hot melt glue!  Gator-Grip® uses an engineering grade solvent-resistant polymer

 

·     Click here to ask the inventor a question.

 

| Home | Where to Buy | FAQ | Our Staff | Inventions | Company | Contact |

Copyright © 2014 - Endeavor Tool Company, All right reserved.
Developed By - Windowshostingpoint.com